Interface with computer to retrieve trouble codes & data- *P1450- Unable to bleed up fuel tank vacuum- test system- purge solenoid stuck closed. -Perform diagnosis- system operating to spec at this time- If fault returns recommend replacing purge solenoid
Tianna W. gave our service a 5 star review on 2/5/2025
Perform inspection & scan . Found multiple codes stored in history & system, Data shows reset 7 mile prior- Readiness monitors are incomplete. See attached report
Michelle M. gave our service a 5 star review on 1/27/2025
Lubricate and check chassis. Change oil and oil filter. Check all fluid levels and tire pressures. Perform basic safety inspection. -Front pads at 8mm. Rear pads at 9mm. -Torqued lug nuts to spec (100 ft. lbs.) -Inflated tires to spec (35PSI) **Tech noted rear shocks seeping. 100k service due based on mileage- spark plugs, coolant flush, brake flush & transmission service.
Brenda B. gave our service a 5 star review on 1/21/2025
Front brake pads at 3mm & rotors are grooved/ show signs of overheating. Rear brake pads less than 2mm & rotors grooved/worn. Recommend replace front & rear brake pads & rotors, & flush brake fluid. -Tech noted vehicle does pull to right & steering wheel is off aligned- recommend wheel alignment.
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Wheel alignment
Edwin P. gave our service a 5 star review on 12/20/2024
Road test vehicle & lift for inspection- found residual oil on lower oil pan- suspect from previous oil change. Clean & inspect for any current leaks- none found at this time. -Customer advised to return for oil change service & will monitor.
Nicole Q. gave our service a 5 star review on 12/16/2024